Two inspectors each measure the same ten parts with the same micrometer. \begin{array}{l|c|c} \textbf{Inspector} & \textbf{Average (mm)} & \textbf{Own spread (mm)} \\ \hline \text{Ravi} & 25.06 & 0.01 \\ \text{Maria} & 25.02 & 0.01 \end{array} What does this result indicate?

A calibration error in the micrometer

Real variation between the parts

Are the questions aligned with the ASQ CQI Body of Knowledge?

Yes. Each question is written around topics included in the published CQI Body of Knowledge and is tagged to the relevant BoK area. These are original practice questions and are not copied from the actual ASQ exam.

In Review Mode, you receive the correct answer and explanation immediately after answering each question. It is designed for learning, not just scoring, so you can correct misunderstandings before moving to the next question.

Does the quiz include calculations?

Yes. The free set includes a balanced mix of conceptual questions, applied scenarios and short calculations. The goal is to help you experience several common CQI question styles.

What is included in the full CQI practice-question package?

The complete package provides additional CQI-style practice sets with broader Body of Knowledge coverage, detailed explanations and more opportunities to work on calculations, scenarios and commonly confused concepts.

Does purchasing the practice tests include the ASQ examination?

No. These are independent exam-preparation materials. Registration, eligibility review and the official certification examination are handled separately by ASQ.

ASQ CQI Metrology Practice Quiz

Try before you buy

Free sample questions

2 questions from this set, shown in full with the correct answer and the reasoning behind it. Read them as a study resource.

Q1.The dial indicator face below is shown at the position of a reading.

What is the indicated deviation?
- A.0.23 mm✓ Correct answer
- B.2.3 mm
- C.23 mm
- D.0.023 mm
Explanation
Multiply the number of divisions the pointer has moved by the value of one division:

$25 \times 0.01 = 0.25 \text{ mm}$

The answer $0.025$ mm would apply if each division were worth $0.001$ mm. Reading any indicator starts with checking what one division represents, because the same looking face is made in several graduations.
Reference: CQI BoK II
Q2.Two inspectors each measure the same ten parts with the same micrometer.

$\begin{array}{l|c|c} \textbf{Inspector} & \textbf{Average (mm)} & \textbf{Own spread (mm)} \\ \hline \text{Ravi} & 25.06 & 0.01 \\ \text{Maria} & 25.02 & 0.01 \end{array}$

What does this result indicate?
- A.A calibration error in the micrometer
- B.Real variation between the parts
- C.Poor repeatability
- D.Poor reproducibility✓ Correct answer
Explanation
Repeatability is how closely the readings of one person agree. Each inspector here spreads only $0.01$ mm, so repeatability is good for both. Reproducibility is the agreement between different operators, and the $0.04$ mm gap between the two averages is exactly a reproducibility problem. The usual cause is a difference in technique, such as how firmly the ratchet is turned, so training and a clearer method are the fix.
Reference: CQI BoK II

Want the other 23 questions in CQI - 2. Metrology?

What you get

How well do you understand Metrology

25 exam-style CQI questions focused on Metrology
Full explanation for every question
Mobile friendly, no install required
Instant feedback as you answer

Strengthen Your Metrology Knowledge

Preparing for the ASQ Certified Quality Inspector (CQI) exam?

This paid 25-question practice quiz focuses on Metrology, Section II of the current CQI Body of Knowledge. It is designed to strengthen your understanding of measurement principles, measuring instruments, calibration, and practical inspection applications. ASQ’s current CQI materials emphasize measurement equipment, metrology, calibration, and inspection techniques as core areas for CQI candidates.

The questions include a practical mix of:

Measurement principles and terminology
Selection of measuring instruments
Common gages and measurement tools
Precision and resolution
Accuracy and measurement error
Surface plate tools and techniques
Specialized inspection equipment
Proper handling and use of measuring equipment
Calibration concepts and requirements
Calibration status and traceability
Measurement adjustments
Environmental effects on measurement
Practical inspection scenarios
Plausible distractors based on common measurement mistakes

Learn from Every Question

This quiz is offered in Review Mode, so you will see the correct answer and a clear explanation immediately after each response.

Each explanation helps you understand:

Why the correct answer is right
Which metrology principle is being tested
Why the other options are less appropriate
How the measuring instrument should be selected or used
How similar concepts may appear in a CQI-style question

The goal is not simply to check your score. It is to strengthen your ability to make reliable measurement decisions during inspection.

Part of the Paid CQI Practice Package

This 25-question quiz is included in the complete CQI Practice Test Package.

Use it to:

Improve your understanding of measurement principles
Select appropriate inspection equipment
Interpret instrument resolution and accuracy
Recognize common measurement errors
Strengthen calibration knowledge
Apply metrology concepts to practical inspection situations
Improve your readiness for the CQI exam

Ready to Test Your Metrology Knowledge?

Complete the 25-question Review Mode quiz and use every incorrect answer as a guide for further study.

Start the CQI Metrology Practice Quiz

What this quiz covers

Technical Mathematics
Metrology
Inspection and Test
Quality Assurance and Improvement

Questions about this practice test

Want the full course, not just the questions?

Quality Gurus video courses cover the whole body of knowledge with worked examples, templates and downloadable notes — taught by Sandeep Kumar.

Browse Quality Gurus courses

CQI - 2. Metrology